If your printer is not printing after installation, try the steps below
- Go to Control Panel > Devices and Printers > Right-click bizhub 227 > Remove device
- Reboot your computer.
- Reinstall the driver you downloaded above.
This resolves most printing-related errors.
Frequently Asked Questions (FAQ)
Q. The installer throws an error.
A. Right-click the downloaded file and choose “Run as Administrator”.
A. Right-click the downloaded file and choose “Run as Administrator”.
Q. The printer isn’t detected after installation.
A. Check the printer section in Device Manager and try updating the driver manually.
A. Check the printer section in Device Manager and try updating the driver manually.
Q. The printer is not turning on or isn’t recognized after connecting.
A. Unplug the printer’s power cable completely. Then, press the power button several times to discharge any remaining electrical charge in the internal circuit.
Once done, reconnect the power cable and try reinstalling the driver.
A. Unplug the printer’s power cable completely. Then, press the power button several times to discharge any remaining electrical charge in the internal circuit.
Once done, reconnect the power cable and try reinstalling the driver.