bizhub 216 Driver Download
Download official Windows GDI and Fax drivers for Konica Minolta bizhub 216. Includes full setup instructions and troubleshooting tips.
bizhub 216 Driver for Windows
Konica Minolta official website provides this Auto-installation driver package.
Compatible with Windows 7/8.1/10/11 versions and supports both 32bit/64bit.
- Installer Type: Auto-installation package (EXE)
- Supported OS: Windows 11 / 10 / 8.1 / 7
bizhub 216 Fax Driver
This is a dedicated PC-FAX driver for the bizhub 216 model.
- Type: PC-FAX Driver
- Compatibility: Windows 11 / 10 / 8.1 / 7
How to Install the Driver
Before starting the installation, please ensure that any previously installed drivers for bizhub 216 have been removed. Also, make sure to disconnect the printer from your PC if it’s currently connected via USB cable.
- Run the downloaded installer.
- Follow the wizard instructions and proceed with “Next”.
- Connect your printer and print a test page after completion.
Can’t Print Even After Installing the Driver?
If your bizhub 216 is not printing after installation, try the steps below:
- Go to Control Panel > Devices and Printers > Right-click bizhub 216 > Remove device
- Reboot your computer.
- Reinstall the driver you downloaded above.
This resolves most printing-related errors.
Frequently Asked Questions (FAQ)
Q. The installer throws an error.
A. Right-click the downloaded file and choose “Run as Administrator”.
A. Right-click the downloaded file and choose “Run as Administrator”.
Q. The printer isn’t detected after installation.
A. Check the printer section in Device Manager and try updating the driver manually.
A. Check the printer section in Device Manager and try updating the driver manually.
Q. The printer is not turning on or isn’t recognized after connecting.
A. Unplug the printer’s power cable completely. Then, press the power button several times to discharge any remaining electrical charge in the internal circuit.
Once done, reconnect the power cable and try reinstalling the driver.
A. Unplug the printer’s power cable completely. Then, press the power button several times to discharge any remaining electrical charge in the internal circuit.
Once done, reconnect the power cable and try reinstalling the driver.